Engine Cover

WARNING: This page is about a different car, the 2009 Volkswagen GTI and 2008 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Removing

-- Pull the engine cover at its attachment points -arrows- upward.

Fig 1: Identifying Engine Cover Attachment Points

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Installing

-- Make sure the rubber insulators fit correctly into the mounts when installing.

Fig 2: Identifying Correct Installation Of Rubber Insulators

Courtesy of VOLKSWAGEN UNITED STATES, INC.

-- Carefully press the engine cover onto the ball studs.

-- To prevent damage, do not hit the engine cover with a fist or tools.