LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2006 >> GTI 1.8 E, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 254 (2.0L - Cylinder Head, VALVETRAIN - Engine Code(S): CBFA & CCTA) >> 15 Cylinder Head, VALVETRAIN >> Removal And Installation >> Balance Shaft Timing Chain >> Removing

Balance Shaft Timing Chain: Removing

WARNING: This page is about a different car, the 2009 Volkswagen GTI and 2008 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the upper timing chain cover. Refer to UPPER TIMING CHAIN COVER .

-- Remove the lower timing chain cover, refer to one of the following:

-- Remove the camshaft timing chain. Refer to CAMSHAFT TIMING CHAIN .

-- Remove the camshaft timing chain guide rail guide pins -1-.

Fig 1: Identifying Camshaft Timing Chain Tensioner Bolts, Camshaft Timing Chain Guide Rail And Guide Pins
GWWA15-10460Courtesy of VOLKSWAGEN UNITED STATES, INC.

-- Remove the camshaft timing chain tensioner bolts -3- and tensioner.

-- Remove the balance shaft chain tensioner -1-.

Fig 2: Identifying Balance Shaft Timing Chain, Tensioning Rail And Guide Rails
GWWA15-10462Courtesy of VOLKSWAGEN UNITED STATES, INC.

-- Remove the tensioning rail guide pin -2- and rail.

-- Remove the guide rail guide pins -3- and rail.

-- Remove the guide rail guide pins -4- and rail.

-- Remove the balance shaft timing chain.