LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2006 >> GTI 1.8 E, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 251 (Controls, Housing - Direct Shift Automatic Transmission 02E (As Of 01.2009)) >> 34 Controls, Housing >> General Information >> Transmission, Transporting And Securing On Assembly Stand

Transmission, Transporting And Securing On Assembly Stand

WARNING: This page is about a different car, the 2008 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required 

Always secure heavy parts when transporting.

Remember there is still oil in the transmission. Do not turn the transmission with the vents facing downward when transporting or when it is on the assembly stand. The oil will leak out.

Transmission, Transporting

Fig 1: Identifying Engine Sling 2024 A Connected To Engine
GWWN34-10210Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Use appropriate lifting tools, for example part of the 2024 A and the 10-222A/12 (not shown in the illustration).

The transmission can also be lifted using the 3336.

Fig 2: Identifying Transmission Support Jig 3336 Connected To Transmission
GWWN34-10530Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Secure the Transmission to the Assembly Bracket

Fig 3: Identifying All Wheel Drive Transmission Secured To Assembly Bracket
GWWN30-10076Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
scientia non olet · About LEMON Manuals