Fan Shroud And Fan

Removing 

-- Remove the fan shroud upper bolts -arrows-.

-- Remove the noise insulation. Refer to Removal and Installation .

-- Unclip the lower coolant hose from the fan shroud.

-- Disconnect the electrical connector -1- and remove the fan shroud lower bolts -arrows-.

Fig 1: Disconnecting Electrical Harness Connector And Removing Mounting Bolts Of Intake Air Elbow

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the fan shroud downward.

-- Disconnect the electrical connector -1- and lay the wire free. Installed position of the connector deviates from the illustration.

Fig 2: Disconnecting Electrical Harness Connector And Lay Cable Free

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the coolant fan nuts -arrows- and remove the fans.

Installing 

Install in reverse order of removal. Note the following:

Tightening Specifications