Transmission Output Speed Sensor -G195-

WARNING: This page is about a different car, the 2009 Volkswagen Rabbit, 2008 Volkswagen Rabbit, 2007 Volkswagen Rabbit, and 2006 Volkswagen Rabbit. However, it is still accessible from the selected car via links, so may be relevant.

Removing

-- Remove the valve body. Refer to VALVE BODY .

-- Remove the transmission output speed sensor bolt -2.

Fig 1: Identifying Transmission Input G182 & Output G195 Speed (RPM) Sensors

Courtesy of VOLKSWAGEN UNITED STATES, INC.

-- Remove the transmission output speed sensor from the transmission.

Installing

Install in reverse order of removal. Pay attention to the following:

-- Press the sensor all the way into the transmission.

-- Install the transmission output speed sensor bolt -2-. Tightening specification, refer to FASTENER TIGHTENING SPECIFICATIONS .

-- Install the valve body. Refer to VALVE BODY .