Wire Routing, Connectors And Bracket On Valve Body

WARNING: This page is about a different car, the 2009 Volkswagen Rabbit, 2008 Volkswagen Rabbit, 2007 Volkswagen Rabbit, and 2006 Volkswagen Rabbit. However, it is still accessible from the selected car via links, so may be relevant.

In this chapter the information regarding working on the solenoid valves is shown in illustrations.

Wiring Routing and Connectors:

Fig 1: Identifying Wire Routing, Connectors And Bracket On Valve Body

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Solenoid Valve 4 -N91-
- Wiring colors to the valve: green/brown.
2 - Solenoid Valve 6 -N93-
- Wiring colors to the valve: green/gray.
3 - Solenoid Valve 5 -N92-
- Wiring colors to the valve: yellow/purple.
4 - Solenoid Valve 9 -N282-
- Wiring colors to the valve: red/blue
5 - Solenoid Valve 10 -N283-
- Wiring colors to the valve: white/black.
6 - Solenoid Valve 3 -N90-
- Wiring colors to the valve: green/blue.
7 - Solenoid Valve 1 -N88-
- Wiring color to the valve: white.
8 - Solenoid Valve 2 -N89-
- Wiring color to the valve: black.
A - Transmission Output Speed Sensor Connector
- Wiring colors to the sensor: blue/orange.
B - Transmission Input Speed Sensor Connector
- Wiring colors to the sensor: white/red.

Bracket for Connectors, Securing the Wires:

Fig 2: Identifying Sensor, Lever And Bracket for Connectors

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Transmission Output Speed Sensor Connector Bracket
- Tightening specification, refer to FASTENER TIGHTENING SPECIFICATIONS .
2 - Transmission Input Speed Sensor Connector Bracket
- Tightening specification, refer to FASTENER TIGHTENING SPECIFICATIONS .
3 - Transmission Fluid Temperature Sensor -G93-
- Wiring color for sensor: orange/orange.
4 - Selector Lever
- Tightening specification, refer to FASTENER TIGHTENING SPECIFICATIONS .
Arrow -
- The wires are attached here.