LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2006 >> GTI 1.8 E, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 242 (2.0L - Engine Assembly - Engine Code(S): CBFA & CCTA) >> 10 Engine Assembly >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2009 Volkswagen GTI and 2008 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
Component Fastener Size Nm
Bolts and Nuts
  M6 10
M7 15
M8 25
M10 40
M12 60
Engine Mount to Body Bolt (1) - 40 + 90°
Engine Mount Bracket to Engine Bolt (1) - 40 + 180°
Engine Mount to Engine Mount Bracket Bolt (1) - 60 + 90°
Pendulum Support to Subframe Bolt 1, - 100 + 90°
Support to Body Bolt (1) - 20 + 90°
Support to Engine Mount Bolt (1) - 20 + 90°
Transmission Mount to Body Bolt (1) - 40 + 90°
Transmission Mount to Transmission Mount Bracket Bolt 1 - 60 + 90°
(1) Always replace
(2) First, install the pendulum support to the transmission bolts then, the pendulum support to subframe bolt.
scientia non olet · About LEMON Manuals