ENGINE, SECURING TO Engine and Transmission Holder VAS 6095

WARNING: This page is about a different car, the 2009 Volkswagen GTI and 2008 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Engine Sling -2024 A-
Shop Crane - Load Cap = 700-1200KG -VAS 6100-
Engine and Transmission Holder -VAS 6095-

Requirement

The engine and transmission is removed and installed on the engine support -T10359-.

-- Separate the transmission from the engine. Refer to ENGINE AND TRANSMISSION, SEPARATING AND ASSEMBLING .

-- Install the engine sling -2024 A- as illustrated and lift the engine using the shop crane - load cap = 700-1200KG -VAS 6100- from the engine-/gearbox jack -V.A.G 1383 A-.

Fig 1: Identifying Engine Lifted

Courtesy of VOLKSWAGEN UNITED STATES, INC.

CAUTION:

Use securing pins on the hooks and pins to prevent damaging the engine.

-- Secure the engine to the engine and transmission holder -VAS 6095-.