Engine Mount Adjustment, Checking

WARNING: This page is about a different car, the 2009 Volkswagen GTI and 2008 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

There must be a distance of at least 10 mm -a- between the engine mount bracket -2- and the right longitudinal member.

Fig 1: Identifying Casting Edge On Engine Support Location

Courtesy of VOLKSWAGEN UNITED STATES, INC.

The casting edge on the engine mount bracket -2- must be parallel to the engine mount support arm -1-.

-- If the conditions are not met, adjust the engine mount. Refer to one of the following:

Passat and CC, refer to .
GTI and Eos, refer to ENGINE AND TRANSMISSION MOUNT, ADJUSTING .
Tiguan, refer to .