Removal And Installation: Radiator

WARNING: This page is about a different car, the 2009 Volkswagen GTI and 2008 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Removing

-- Drain the coolant. Refer to DRAINING AND FILLING .

-- Remove the fan shroud. Refer to FAN SHROUD .

-- Remove the upper coolant hose -arrow- from the radiator.

Fig 1: Identifying Radiator Upper Coolant Hose

Courtesy of VOLKSWAGEN UNITED STATES, INC.

-- Detach the air duct bolts -arrows- from the lock carrier and remove the air duct.

Fig 2: Identifying Air Guide Screws And Air Guide

Courtesy of VOLKSWAGEN UNITED STATES, INC.

-- Remove the bolts -1 and 2- and remove the radiator upward.

Fig 3: Identifying Radiator And Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Installing

Installation is performed in reverse order.

Tightening specifications, refer to RADIATOR, FAN SHROUD AND FANS OVERVIEW .