Engine Coolant Temperature (ECT) Sensor with a Clip

WARNING: This page is about a different car, the 2009 Volkswagen GTI and 2008 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Engine Coolant Temperature Sensor G62 Electrical Connector

Courtesy of VOLKSWAGEN UNITED STATES, INC.

-- Disconnect the electrical connector -1- from the ECT sensor.

-- Remove the clip, to do so, press the latches -arrow-.

-- Remove the ECT sensor.

NOTE:

Install the new ECT sensor with an O-ring as quickly as possible to prevent coolant from leaking out.