Secondary Air Injection Pump Motor -V101-

WARNING: This page is about a different car, the 2009 Volkswagen GTI and 2008 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Removing

-- Remove the noise insulation. Refer to Description and Operation .

-- Remove the left front wheel housing liner. Refer to FRONT WHEEL HOUSING LINER .

-- Loosen the pipes -1-, loosen the bolts -2-, disconnect the electrical connector -3- and remove the Secondary Air Injection (AIR) pump motor.

Fig 1: Identifying Secondary Air Injection Pump Motor And Mounting Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Installing

Installation is performed in reverse order.