Heating Final Drive Gear To Approx. 100 ° C And Installing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2005 Volkswagen Jetta, 2005 Volkswagen GTI, 2004 Volkswagen Jetta, 2004 Volkswagen GTI, and 2003 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
- Use bolts -A- from repair kit to guide final drive gear into position during installation.
Use special bolts -1- with backing plates -2- and nuts -3- according to Parts catalog.