Work sequence

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2005 Volkswagen Jetta, 2005 Volkswagen GTI, 2004 Volkswagen Jetta, 2004 Volkswagen GTI, and 2003 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Connect Vehicle Diagnostic, Testing and Information System VAS5051 using diagnostic cable VAS5051/1 or diagnostic cable VAS5051/3B as follows:

Fig 1: VAS 5051 Connected To Data Link Connector

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Push plug of diagnostic cable onto diagnostic connection.
Depending upon desired function: Switch ignition on or Start engine Selectable functions (modes) under address word 33, CARB / OBD II .

NOTE:

In the functions 04 - Basic setting/08 - Read data block, the display zones will be listed from top to bottom.
If the display does not indicate as described in the work sequence: VAS5051 Vehicle Diagnostic, Testing and Information System operating instructions

Fig 2: Selecting Operating Mode On VAS 5051

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Indicated on display: