LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2006 >> GTI 1.8 E, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (1.8L - Fuel Injection Ignition, Engine Code(S): AWW, AWP (A4 Platform)) >> 01 On Board Diagnostic (OBD) >> Measuring Value Block >> Measuring value blocks, evaluating display groups 50 to 69 (Speed regulation) >> Display group 55 (Speed regulation) Idling stabilization

Display group 55 (Speed regulation) Idling stabilization

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2005 Volkswagen Jetta, 2005 Volkswagen GTI, 2004 Volkswagen Jetta, 2004 Volkswagen GTI, and 2003 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Display group 55 (Speed regulation) Idling stabilization
  • Engine running at idling speed
Read Measuring Value Block 55 Indicated on display    
xxxx RPM xx.xx% xx.xx% xxxxx      
1 2 3 4 Display zones Specification Evaluation
        Operating mode xxxxx  
      Idling regulator learning value Air conditioner on (A/C High) Air conditioner off (A/C Low) -6.0 to 6.0% -3.0 to 3.0% ---
    Idling regulator -4.30 to 12.20% ---
  Engine speed (idling speed): Manual transmission Automatic transmission 700 to 820 RPM 640 to 760 RPM  
NOTE:
  • For display zone 3:
  • Displayed is the amount that the idling speed stabilization has moved away from the prescribed average. For a new engine the values lie in the positive range, because of the higher friction and in the negative range with an engine that has run-in.