LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2006 >> GTI 1.8 E, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (1.8L - Fuel Injection Ignition, Engine Code(S): AWW, AWP (A4 Platform)) >> 01 On Board Diagnostic (OBD) >> Measuring Value Block >> Measuring value blocks, evaluating display groups 30 to 49, 99, 107 (oxygen sensor control) >> Display group 46 (oxygen sensor control) Catalyst diagnostic (conversion test)

Display group 46 (oxygen sensor control) Catalyst diagnostic (conversion test)

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2005 Volkswagen Jetta, 2005 Volkswagen GTI, 2004 Volkswagen Jetta, 2004 Volkswagen GTI, and 2003 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Readiness code

Display group 46 (oxygen sensor control) Catalyst diagnostic (conversion test)
  • Vehicle stationary, engine running at increased idling speed
  • Control module in mode 04-Basic settings
Read Measuring Value Block 46 Indicated on display    
xxxx RPM xxxx ° C x.xx Text      
1 2 3 4 Display zones Specification Evaluation
        Result of catalyst conversion test (Test OFF/test ON/Cat B1 OK/Cat B1 n.OK) Cat B1 OK ---
      Amplitude ratio 0.00 to 0.32 ---
    Catalyst temperature min. 440 ° C ---
  Engine speed 1800 to 2200 rpm ---