LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2006 >> GTI 1.8 E, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (1.8L - Fuel Injection Ignition, Engine Code(S): AWW, AWP (A4 Platform)) >> 01 On Board Diagnostic (OBD) >> Measuring Value Block >> Measuring value blocks, evaluating display groups 30 to 49, 99, 107 (oxygen sensor control) >> Display group 30 (oxygen sensor control)

Display group 30 (oxygen sensor control)

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2005 Volkswagen Jetta, 2005 Volkswagen GTI, 2004 Volkswagen Jetta, 2004 Volkswagen GTI, and 2003 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Display group 30 (oxygen sensor control)
  • Engine running at idling speed
Read Measuring Value Block 30 → Indicated on display    
xxx xxx          
1 2 3 4 Display zones Specification Evaluation
             
           
    Oxygen sensor control status after catalyst 110  
  Oxygen sensor control status before catalyst 111  
NOTE:
  • For display zones 2:
  • The 3rd display position is not set to 1 until in part throttle range.
scientia non olet · About LEMON Manuals