LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2006 >> GTI 1.8 E, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (1.8L - Fuel Injection Ignition, Engine Code(S): AWW, AWP (A4 Platform)) >> 01 On Board Diagnostic (OBD) >> Measuring Value Block >> Measuring value blocks, evaluating display groups 0 to 9 (Basic functions) >> Display group 3 (Basic functions) Mass Air Flow (MAF) sensor

Display group 3 (Basic functions) Mass Air Flow (MAF) sensor

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2005 Volkswagen Jetta, 2005 Volkswagen GTI, 2004 Volkswagen Jetta, 2004 Volkswagen GTI, and 2003 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Display group 3 (Basic functions) Mass Air Flow (MAF) sensor
  • Engine running at idling speed
Read Measuring Value Block 3 Indicated on display    
xxxx RPM x.xx ms x.x% xx.x ° BTDC      
1 2 3 4 Display zones Specification Evaluation
        Ignition angle Engine code AWW Engine code AWP 6 to 12 [degrees] BTDC 5 to 12 [degrees] BTDC ---
      Throttle valve angle potentiometer 1 G187 0.2 to 4.0% Evaluating display group 10, display zone 2 - Engine load  
    Air mass drawn in 2.0 to 4.5 g/s Evaluating display group 2, display zone 4 - Air mass drawn in  
  Engine speed (idling speed): Manual transmission Automatic transmission 700 to 820 RPM 640 to 760 RPM Evaluating display group 1, display zone 1 - Engine speed (idling speed)  
NOTE:
  • For display zone 3:
  • Display values must be approx. 100% when accelerator pedal is fully depressed.