LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2006 >> GTI 1.8 E, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (1.8L - Fuel Injection Ignition, Engine Code(S): AWW, AWP (A4 Platform)) >> 01 On Board Diagnostic (OBD) >> Measuring Value Block >> Measuring value blocks, evaluating display groups 0 to 9 (Basic functions) >> Display group 1 (Basic functions)

Display group 1 (Basic functions)

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2005 Volkswagen Jetta, 2005 Volkswagen GTI, 2004 Volkswagen Jetta, 2004 Volkswagen GTI, and 2003 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Display group 1 (Basic functions)
  • Engine running at idling speed
Read Measuring Value Block 1 → Indicated on display    
xxxx RPM xx.x ° C x.x% xxxxxxxx      
1 2 3 4 Display zones Specification Evaluation
        Adjustment conditions for basic setting 1x111111 Significance of 8-digit number block for readiness code  
      Oxygen sensor regulator before catalyst -10.0 to 10.0% Evaluating display group 33, display zone 1 - oxygen sensor regulator before catalyst  
    Coolant temperature 80 to 110 ° C Evaluating display group 4, display zone 3 - Coolant temperature  
  Engine speed (idling speed): Manual transmission Automatic transmission 700 to 820 RPM 640 to 760 RPM Evaluating display group 1, display zone 1 - Engine speed (idling speed)  
scientia non olet · About LEMON Manuals