LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2006 >> GTI 1.8 E, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (2.8L - Engine Mechanical, Engine Code: BDF) >> 15 - Engine - Cylinder Head, Valvetrain >> Cylinder head, servicing >> Cylinder head, servicing >> Preparing cylinder head gasket for installation

Preparing cylinder head gasket for installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Volkswagen GTI, 2004 Volkswagen Jetta, 2004 Volkswagen GTI, 2003 Volkswagen Jetta, and 2003 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating 3 mm Holes In The Cylinder Head Gasket
GW00000474Courtesy of VOLKSWAGEN UNITED STATES, INC.

Special tools, testers and auxiliary items required

scientia non olet · About LEMON Manuals