Crankshaft dimensions
(Dimensions in mm)
| Honing dimension | Crankshaft bearing pins-diameter | Connecting rod bearing pins-diameter | ||
| Basic dimension | 54.00 | -0.017 -0.037 | 47.80 | -0.022 -0.042 |
| 1st oversize | 53.75 | -0.017 -0.037 | 47.55 | -0.022 -0.042 |
| 2nd oversize | 53.50 | -0.017 -0.037 | 47.30 | -0.022 -0.042 |
| Stage III | 53.25 | -0.017 -0.037 | 47.05 | -0.022 -0.042 |