Battery Interrupt Igniter -N253-, Safety Precautions
WARNING:
- Testing, assembly, and repairs may only be performed by trained personnel.
- Battery Ground (GND) strap must be disconnected before performing any work on the battery isolation system.
- Technician(s) must discharge themselves electrostatically before touching the battery isolator. This is accomplished by touching grounded metal like, for example, water pipes, heating pipes or metal carriers.
- Always install battery isolator units in the vehicle as soon as they are removed from the packaging
- If installation work is interrupted, IMMEDIATELY return the battery isolator unit to its original packaging.
- Battery isolator units must never be left out unattended.
- DO NOT install battery isolator units that have fallen onto a hard surface, or which have signs of damage.
- Storage and transport are subject to laws for explosive substances.