Fuel Level Sensor G , removing and installing

Removing

• Remove fuel delivery unit refer to Fuel delivery unit, removing and installing  .

Fig 1: Fuel Gauge Sender Connectors & Retaining Tabs

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Disengage connector prongs of wires - 3  - and - 4  - and disconnect.
• Pry off retaining straps - 1  - and - 2  - using screwdriver and remove fuel gauge sensor towards bottom - arrows  -.

Installing:

• Insert fuel level sensor in guides on fuel delivery unit and push up until it engages.
• Install Fuel Pump (FP) refer to Fuel delivery unit, removing and installing  .