Toothed belt, tensioning
Courtesy of VOLKSWAGEN UNITED STATES, INC.
- Tension toothed belt. To do this, remove pin T40011 and remove tensioning bolt T10092.
- Turn over crankshaft twice and check if markings on camshaft and crankshaft still align with their reference points.
- Install vibration damper and belt pulley tightening torque: 25 Nm
- Install center part of toothed belt (insert bolts with Locking Compound D 000 600 A2.) (Part numbers are for reference only. Always check with your Parts Department for the latest part number information). Torque specification: 10 Nm