Rear bumper carrier (Golf R32), assembly overview

NOTE:

Slight changes may have to be made to removal and installation procedures, depending upon equipment installed in vehicle.

Fig 1: Exploded View Of Rear bumper carrier (Golf R32)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Bumper carrier

2 - Attachment rail

3 - Guide piece

To remove and install, pull out/slide in bumper cover parallel out of guide pieces (left and right sides)

4 - Bolt

5 - Expanding nut

6 - Internally threaded pop rivet

7 - Bolt

8 - Expanding nut

9 - Bolt

10 - Bolt