Micro-switch, removing and installing: Installing

Fig 1: Identifying Micro-Switch, Retaining Profile & Wires

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Secure wires - 1  - and - 2  - in retaining profile - arrow  - of micro-switch - 3  -.

Fig 2: Identifying Micro-Switch, Catches & Lock Cylinder Housing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Lock catches - arrows  - of micro-switch - 1  - into lock cylinder housing - 2  -.

Fig 3: Identifying Securing Tabs On Lock Cylinder Housing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Make sure that micro-switch is positioned with securing tabs - arrows  - on lock cylinder housing - 1  -.
• Before locking micro-switch, if must be checked that wires are lying correctly in retaining profile of micro-switch and lock cylinder. If this is not case and micro-switch is locked, wires/micro-switch may be damaged.

Fig 4: Identifying Release Catches At Micro-Switch & Lock Cylinder Housing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Lock micro-switch - 1  - with lock cylinder housing - 2  -. Make sure that catch - arrow  - is locks correctly.
• Install lock cylinder housing. Refer to Lock cylinder housing, removing and installing