Rear Lid Handle Unlock Switch -E234- - Jetta Wagon, removing and installing

Removing 

• Removing inner rear lid trim

Refer to 70 - INTERIOR TRIM

Fig 1: Identifying Multi-Connector (Jetta Wagon)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Disconnect multi-connector -1-
• Remove rear wiper motor. Refer to Rear window wiper motor -V12-, removing  .

Fig 2: Identifying Switch Screws (Jetta Wagon)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove screws -arrows-.
• Remove switch upwards.

Installing 

Install in reverse order of removal.