Output Diagnostic Test Mode
-- Connect Vehicle Diagnosis, Testing and Information System VAS 5051A VEHICLE DIAGNOSIS, TESTING AND INFORMATION SYSTEMS
-- In Vehicle Diagnostic, Testing and Information System VAS 5051A, select operating mode "Guided Fault Finding".
-- Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:
- Body
- Body repair procedures
- 01 - On Board Diagnostic (OBD) capable systems
- Parking Aid
- Parking assistance functions
- Parking Aid System Output Diagnostic Test Mode (DTM)
Due to different software versions, different sensor names may be displayed in the first Parking Aid Control Module -J446- software version. If this is the case, the follow allocation applies:
Left Rear Center Parking Aid Sensor -G204- is Left Rear Parking Aid Sensor -G203-
Left Rear Inner Parking Aid Sensor -G334- is Left Rear Center Parking Aid Sensor -G204-
Right Rear Inner Parking Aid Sensor -G335- is Right Rear Center Parking Aid Sensor -G205-
Right Rear Center Parking Aid Sensor -G205- is Right Rear Parking Aid Sensor -G206-