68-Pin Test Box Adapter, VAG1598/19, Installing
Test requirements
- Ignition switched off.
Work procedure
When the Diesel Direct Fuel Injection (DFI) Engine Control Module (ECM) -J248- electrical harness connector is disconnected, the adaptation values are erased and the DTC memory content remains intact.
Procedure
-- Remove the Diesel Direct Fuel Injection (DFI) Engine Control Module (ECM) -J248-. Refer to DIESEL DIRECT FUEL INJECTION ECM, REPLACING .
-- Disconnect the Diesel Direct Fuel Injection (DFI) Engine Control Module (ECM) -J248- electrical harness connector.
-- Connect the Adapter - 68 Pin VAG1598/18 to the Diesel Direct Fuel Injection (DFI) Engine Control Module (ECM) -J248- electrical harness connector.