LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2005 >> Jetta TDI, Automatic >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Rear Suspension (Sedan) (A5 Platform) >> 42 Rear Suspension >> Removal And Installation >> Tie Rod >> Tightening Specifications

Tightening Specifications

Component Tightening Specification
Tie rod to wheel bearing housing
  • Use a new bolt and nut.
  • Tighten in curb weight position.
 130 Nm + 90° turn
Tie rod to subframe
  • Use a new bolt and nut.
 90 Nm + 90° turn
Stabilizer bar to subframe
  • Use new bolts.
  • Tighten in curb weight position.
 25 Nm + 45° turn
Stabilizer bar to coupling rod
  • Use new nut.
 45 Nm
scientia non olet · About LEMON Manuals