Manifold Absolute Pressure (MAP) sensor G71 and Barometric Pressure (BARO) sensor F96 , checking: Notes
WARNING: This page is about a different variant/trim than selected.
The altitude sensor is located in the Diesel direct injection system control module. The manifold absolute pressure sensor is a separate component and is located in the pipe between the charge air cooler and intake manifold.
NOTE:
- Only gold-plated contacts may be used to repair the terminals in the manifold absolute pressure sensor with intake manifold temperature sensor.
Special tools, testers and auxiliary items required
- Scan Tool (ST) VAG1551 (or Scan Tool (ST) VAG1552 ) with cable VAG1551/3 or cable VAG1551/1
- Test box VAG1598/31
- Hand multimeter VAG1526A or Multimeter VAG1715
- Turbocharger tester VAG1397A
- Adapter set VAG1594
- Wiring diagram