LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2005 >> Jetta TDI, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (1.9L - Fuel Injection Glow Plug, Engine Code ALH, From My 2002 (A4 Platform)) >> 23 Diesel Fuel Injection >> Diesel direct injection system, servicing >> Injection pump, removing and installing >> Removing

Injection pump, removing and installing: Removing

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • The vibration damper/belt pulley, the center and lower toothed belt guard as well as the assembly mounting can remain installed.
NOTE:
  • To remove injector pipe set, use injector line wrench 3035.
  • To not alter the shapes of the bends.
Fig 1: Identifying Injection Pump Sprocket, Rig Pin 3359, Bolts & Nut
GW00000739Courtesy of VOLKSWAGEN UNITED STATES, INC.
NOTE:
  • DO NOT loosen the hub nut - 2  -. If nut - 2  - is loosened the injection pump basic setting will be altered and this cannot be reset with normal workshop equipment.
Fig 2: Compact Bracket Securing Bolts
GW00001061Courtesy of VOLKSWAGEN UNITED STATES, INC.
Fig 3: Rear Support Bolt
GW00001062Courtesy of VOLKSWAGEN UNITED STATES, INC.
scientia non olet · About LEMON Manuals