Engine Oil
WARNING: This page is about a different variant/trim than selected.
Oil Capacities
With a oil filter change, refer to Fluid Capacity Tables.
Without a oil filter change, refer to Fluid Capacity Tables.
If necessary, fill to the MAX mark on the oil dipstick. Refer to Fig 1.
Viscosity Classes and Specifications
1 - MAX mark
2 - MIN mark
a - Oil level in the area of the MAX mark: Do not add engine oil.
b - Oil level in the center area: Oil can be added.
c - Oil level in the area of the MIN. mark: Add approximately 0.5 liter of engine oil!