LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2005 >> Jetta TDI, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (1.9L - TDI Engine Mechanical, Fuel Injection Glow Plug, Engine Code(S): BEW (A4 Platform)) >> 26 - Exhaust system, Emission controls >> Exhaust system components, removing and installing >> Muffler with mountings >> Aligning rear muffler free of stress

Aligning rear muffler free of stress

WARNING: This page is about a different variant/trim than selected.
Fig 1: Installing Muffler Free Of Tension
GW00000275Courtesy of VOLKSWAGEN UNITED STATES, INC.

Aligning rear muffler free of stress

The mounting pins on the exhaust pipe must run parallel with the tunnel bridge (dimension - x  - is the same on left and right).

scientia non olet · About LEMON Manuals