LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2005 >> Jetta TDI, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (1.9L - TDI Engine Mechanical, Fuel Injection Glow Plug, Engine Code(S): BEW (A4 Platform)) >> 21 - Turbocharger, G-Charger >> Charge air system with turbocharger >> Charge air cooling components, removing and installing >> Notes

Charge air cooling components, removing and installing: Notes

WARNING: This page is about a different variant/trim than selected.

Observe safety precautions. Refer toSafety precautions  .

Observe rules for cleanliness. Refer to Rules for cleanliness  .

NOTE:
  • All hose connections secured by clips.
  • The charge air system must be free of leaks.
  • Do not install hose connections with lubricant containing oil.
  • For assembly use lubricating agent (water without additive) if necessary. Do not use lubricating agents containing oil.
  • When repairing remove oil from connections and hose ends.
scientia non olet · About LEMON Manuals