Crankshaft oil seal - belt pulley end, replacing: Installing

NOTE:

• The oil seal sealing lip must not be additionally oiled or greased.

• Remove oil residue from crankshaft journal using clean cloth.

Fig 1: Identifying Guide Sleeve T10053/1

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Mount guide sleeve T10053/1 onto crankshaft journal.
• Slide oil seal over guide sleeve onto crankshaft journal.

Fig 2: Identifying Press Sleeve T10053

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Using press sleeve T10053 , press oil seal onto stop with center bolt.
• Install toothed belt and tension. Refer to Toothed belts, removing, installing and tensioning  .