Assembly mountings

WARNING: This page is about a different variant/trim than selected.

Tightening torques

Fig 1: Identifying Engine Mounting Bracket & Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Assembly mounting, right:

* Replace bolts

Fig 2: Identifying Transmission Mounting Bracket & Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Assembly mounting, left, on vehicles with manual transmission:

1 -	Mounting to body * See note	40 Nm + 90 ° ( 14 turn) further
2 -	Mounting to body	25 Nm
3 -	Mounting to transmission console	100 Nm

* Replace bolts

Fig 3: Identifying Transmission Mounting Bracket & Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Assembly mounting, left, on vehicles with automatic transmission:

1 -	Mounting to body * See note	40 Nm + 90 ° ( 14 turn) further
2 -	Mounting to body	25 Nm
3 -	Mounting to transmission console	100 Nm

* Replace bolts

Fig 4: Identifying Pendulum Support

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Pendulum support

Assembly order:

1 -	Pendulum support to subframe * See note	20 Nm + 90 ° ( 14 turn) further
2 -	Pendulum support to transmission * See note	40 Nm +45 ° ( 18 turn) further
3 -	Pendulum support to transmission * See note	40 Nm +45 ° ( 18 turn) further

* Replace bolts