Routing Overview

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Chain Drive, Assembly Overview

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Sprocket, for the Exhaust Camshaft
Chain Tensioner, for the Camshaft Timing Chain
- At the top, with a sliding insert.
Timing Chain, for the Camshafts
Tensioning Rail, for the Camshaft Timing Chain
- For the chain tensioner.
- Secured to the cylinder block.
Chain Tensioner, for the Oil Pump Timing Chain
- With a tensioning rail.
Sprocket, for the Crankshaft
- Component of the crankshaft.
Guide Rail, for the Oil Pump Timing Chain
- Secured to the upper oil pan.
Sprocket, for the Oil Pump
- Removing and installing, refer to one of the following
  - Engine codes BGP and BGQ, refer to OIL PUMP .
  - Engine codes CBTA and CBUA, refer to OIL PUMP .
Guide Rail, for the Oil Pump Timing Chain
Timing Chain, for the Oil Pump
- From MY 08 the roller chain has been changed to a toothed chain.
Double Sprocket, for the Camshaft and Oil Pump Timing Chains
Glide Rail, for the Camshaft Timing Chain
Camshaft Adjuster, for the Intake Camshaft
- With the sprocket.