Engine, Front And Side
WARNING: This page is about a different variant/trim than selected.
- Cylinder Block
- Gasket
- Always replace.
- Vacuum Pump, for the Brake Booster
- Do not open.
- Removing and installing, refer to BRAKE BOOSTER VACUUM PUMP .
- Bracket
- Bolt
- 10 Nm
- Oil Filter Bracket
- Overview, refer to OIL FILTER BRACKET WITH ATTACHMENTS OVERVIEW .
- Bolt
- 25 Nm
- Bolt
- 10 Nm
- Bolt
- 10 Nm
- Thermostat Housing
- With the thermostat and coolant pipe.
- Bolt
- 10 Nm
- Intake Manifold Support
- For engines with a Secondary Air Injection (AIR) system only.
- Bolt
- 25 Nm
- Bolt
- 10 Nm
- Bolt
- 25 Nm
- Accessory Bracket
- Bolt
- 40 Nm + 90° (1/4) additional turn.
- Always replace.
- Engine Mount
- Guide Tube
- For the oil dipstick.
- Transport Strap
- Not needed for service.
- Bolt
- 25 Nm
- Bolt
- 10 Nm
- Coolant Pump
- With a integrated silicone seal for the cylinder block seal.
- Removing and installing, refer to COOLANT PUMP .