EVAP System Function Overview
WARNING: This page is about a different variant/trim than selected.
- Evaporative Emission (EVAP) Canister
- Adapter Hose KLI 9210/55-1 Installed Location
- Used during the fuel system leak test.
- EVAP Canister Purge Regulator Valve 1 -N80-
- Vent Line
- To the throttle valve control module -J338-
- Solenoid Valve
- For the leak detection pumpl
- Vacuum Line
- Vehicles through MY 09: to the intake manifold.
- Vehicles from MY 10: to the connection to the vacuum line between the vacuum pump and the brake booster.
- Air Filter Housing
- For the leak detection pump.
- Leak Detection Pump -V144-
- Fuel Tank
- Cap