Master Cylinder: Removing

-- Remove the bracket. Refer to MOUNTING BRACKET .

-- Unclip the mount for the master cylinder actuator rod using T10005.

Fig 1: Identifying Pliers T10005 To Disengage Master Cylinder Operating Rod Mount

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Place a spacer -A- between the clutch pedal and the jounce bumper and push the clutch pedal down as far as the spacer.

Fig 2: Identifying Method To Disengage Securing Bracket And Pull Master Cylinder Out Of Mounting Bracket

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

• Spacer size = approximately 40 mm (for example 1/2" drive socket)

-- Unlock the securing clip -B- and remove the master cylinder from the bracket -arrow 1- and -arrow 2-.