Master Cylinder: Installing

• Move the clutch pedal into its rest position.

-- Attach the mount -2- to the master cylinder actuator rod -1-.

Fig 1: Identifying Installation Of Mount On Master Cylinder Operating Rod

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Place a spacer -A- between the clutch pedal and the jounce bumper and push the clutch pedal down as far as the spacer.

Fig 2: Identifying Master Cylinder Engaged On Mounting Bracket

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

• Spacer size = approximately 40 mm (for example 1/2" drive socket)

-- Lock the master cylinder to the bracket -arrow 1- and -arrow 2-.

-- Push the master cylinder actuator rod -1- in the -direction of the arrow- until the mount -2- audibly engages inside the clutch pedal.

Fig 3: Identifying Master Cylinder Actuator Rod Pressed Until Mount Engages Audibly In Clutch Pedal

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the bracket. Refer to MOUNTING BRACKET .