Rear Lid Handle Unlock Switch -E234- - Jetta, removing and installing
WARNING: This page is about a different variant/trim than selected.
Removing
CAUTION:
Before beginning repairs on the electrical system:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.
- Removing inner rear lid trim
Refer to 70 - INTERIOR TRIM
- Unclip multi-connectors -1- and -2- from retainers and disconnect.
- Unclip rod -arrow- from lock cylinder.
- Remove screws -1-.
- Remove lock cylinder upwards.
- Remove screws -arrows-
- Remove switch upwards.
Installing
Install in reverse order of removal.