Rear Lid Handle Unlock Switch -E234- - Jetta Wagon, removing and installing
WARNING: This page is about a different variant/trim than selected.
Removing
CAUTION:
Before beginning repairs on the electrical system:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.
- Removing inner rear lid trim
Refer to 70 - INTERIOR TRIM
- Disconnect multi-connector -1-
- Remove rear wiper motor. Refer to Rear window wiper motor -V12-, removing .
- Remove screws -arrows-.
- Remove switch upwards.
Installing
Install in reverse order of removal.