LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2005 >> Jetta TDI, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Electrical Equipment (A4 Platform)) >> 94 Lights, Switches - Exterior >> License plate lights >> License plate light, removing and installing

License plate light, removing and installing

WARNING: This page is about a different variant/trim than selected.

Removing: 

CAUTION:

Before beginning repairs on the electrical system:

  • Switch off all electrical consumers.
  • Switch ignition off and remove ignition key.
Fig 1: License Plate Light Screws
GW00004227Courtesy of VOLKSWAGEN UNITED STATES, INC.

Installing: 

Install in reverse order of removal.

NOTE:

The license plate light lense contains a silver reflector strip -arrow-. This must always face the bumper when installing.

Fig 2: License Plate Light Lense Silver Reflector Strip
GW00004228Courtesy of VOLKSWAGEN UNITED STATES, INC.