High Beam Headlight bulb -M30- / -M32-, replacing: Removing
WARNING: This page is about a different variant/trim than selected.
CAUTION:
Before beginning repairs on the electrical system:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.
- Release spring clip -arrow- and remove sealing cover.
Fig 2: Identifying Electrical Connection, Retaining Clip, Lugs & Bulb (High Beam Headlight Bulb, Golf)
- Disconnect electrical connection -1- from bulb.
- Push retaining clip -2- over lugs -3- and release.
- Pull bulb -4- out of reflector.