Break down of display content for display group number 011
WARNING: This page is about a different variant/trim than selected.
| Display group 011 -Central control module- | ||||||
| Read Measuring Value Block 11 | → | ← Indicated on display | ||||
| xxx | xxx | xxx | xxx | |||
| 1 | 2 | 3 | 4 | ← Display zones | Specification | Evaluation |
| Empty1) | ||||||
| Rear first detent2) | open, closed, not installed |
Refer to Evaluating display group number 011 | ||||
| Automatic lock / unlock switch | not relevant | |||||
| Immobilizer key recognition | yes, no, not installed |
|||||
1) Empty means in this case: Display zone is blank
2) Lock rotary latch must be engaged in first detent