List of selectable functions
WARNING: This page is about a different variant/trim than selected.
| Reference | |
| 01 - Check Control Module Version | Control Module Version, checking |
| 02 - Check DTC Memory | Check DTC Memory |
| 03 - Output Diagnostic Test Mode | Output Diagnostic Test Mode (DTM) |
| 05 - Erase DTC memory | Erase DTC memory |
| 06 - End Output | End output |
| 07 - Code Control Module | Airbag Control Module, coding using V.A.G 1551 scan tool |
| 08 - Read Measuring Value Block | Read Measuring Value Block |
NOTE:
- A list of possible functions is printed out after pressing the HELP button.
- Do not select further functions, which can be printed out after pressing the HELP button.
- After the function is completed the V.A.G 1551 returns to the following start position:
Indicated on display:
| Rapid data transfer HELP Select function XX |