Upper C-pillar trim, removing and installing (Jetta without side curtain protection): Removing

• Remove rear shelf → Rear shelf, removing and installing  .
• Pull off seal in area of trim.
• Unclip cover cap - 2  - and unscrew hex bolt - 3  - (40 Nm).
• Remove belt relay - 1  - , tension disc - 4  - and spacer sleeve - 5  -.

• Unclip trim from C-pillar.

Fig 1: Upper C-Pillar Trim Assembly Overview (Jetta Without Side Curtain Protection)

Courtesy of VOLKSWAGEN UNITED STATES, INC.