Upper B-pillar trim, removing and installing (Vehicles with side curtain protection 05.01 ): Removing

• Pry off cap - 1  -.
• Unscrew bolt - 2  - (40 Nm) and remove belt relay - 3  -.
• Unclip emblem, airbag - 4  - using a small screwdriver.
• Unscrew bolt - 5  - (2 Nm).

• Loosen lower B-pillar trim in upper area - arrow A  -.

Fig 1: Upper B-Pillar Trim Assembly Overview (Vehicles With Side Curtain Protection 05.01 )

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Loosen B-pillar trim - 6  - first at the sides, then in center of B-pillar - 7  - - arrow B  -.